Coda C5 Guide de l'utilisateur télécharger pdf (Page 11)

Using unbalanced connections

When connecting the C5 amplifier to an unbalanced audio source, the signal conductor

should be terminated to XLR pin2 and the cable screen terminated to both pins 1 and 3.

In bridged mode output channel 1 signal chain provides the signal for the 1 & 2 pair of

amplifier channels, output channel 3 signal chain provides the signal for the 3 & 4 pair.

Amplifier output connections

The C5 amplifier is fitted with one Speakon

connector per amplifier channel. The

appropriate conductor terminations are shown below and on the rear panel of the unit.

The Speakon

connector for amplifier channel 1 carries the output for amplifier channels

1 and 2. In addition this connector can also be used if the pair of amplifier channels is

being operated in bridged mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Pas de commentaire

Coda C5 Guide de l'utilisateur Page 11