Coda 1 Manuel d'utilisateur télécharger pdf (Page 7)

AC LINE INPUT (SEE BOTTOM) GROUND

LEFT

PHONO / LINE

RIGHTRIGHTRIGHTRIGHTRIGHTRIGHTRIGHTRIGHT LEFTLEFTLEFTLEFTLEFTLEFTLEFTLEFT RIGHT

COMPACT DISCTUNERVIDEOINRECORD ONEOUTINRECORD TWOOUTOUTPUT

LEFT RIGHT

BALANCED OUTPUT

DETAILED INSTALLATION

II. Source-Output, and Power Connections

The input and output connectors are clearly marked on the rear lip of the top cover. It

is important to remember the correct left or right channel orientation. The function and

channel markings on the rear panel correspond to the front panel controls and their

signal paths.

1. The GROUND post should be attached to the ground wire from a turntable.

2. The PHONO/LINE inputs should be attached to either the outputs of a turntable, or

if using the bypass option, may be treated as another line level.

3. The CD, TUNER, and VIDEO input connections are all line level inputs, requiring only the

insertion of the RCA plugs.

4. The RECORD ONE and TWO inputs should be attached to the OUTPUTS of the

corresponding recording device; alternately, they may be used as additional line inputs.

5. The RECORD ONE and TWO outputs should be attached to the INPUTS of the

corresponding recording device.

6. The OUTPUTS (unbalanced) should be attached to the amplifier inputs either directly,

or through a crossover or processor, as appropriate to the application.

7. The BALANCED OUTPUTS should be attached to the balanced inputs of the amplifier,

either directly or through a crossover or processor, as appropriate to the application.

8. The AC LINE INPUT should be attached to the power cable provided with the pre-

amplifier. After making the appropriate connections and rotating the level control fully

counter clockwise, insert the three prong safety plug into an appropriate AC power

source. Once properly connected, the LED on the front panel will light. At this point, you

may switch on your chosen ancillary components including the power amplifier.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Pas de commentaire

Coda 1 Manuel d'utilisateur Page 7